General for Farm Butler
Farm Butler is a product that can help make everyday life easier, because you do not have to go out early in the morning and open up the animals as well as in the evening to close again.
Farm Butler is NOT a product that can necessarily ensure animal safety. This means that the animals, for example, chickens, should still be fenced in, because the fox or other predators cannot enter the herd.
Furthermore, it must be ensured that the door always slides as it should. This means that the door must be free of leaves, twigs, ice, snow and other things that can prevent it from slipping properly.
Mechanical Specifications:
Measurement:
Width: 170mm, Height: 120mm, Depth: 55mm
Weight:
980 gram
IP (Sealing Effectiveness):
IP32
Electrical Specification:
Supply voltage:
90 – 240 VAC, 50/60 Hz
Power consumption:
approx. 0,9 Watt during normal operation
approx. 11 Watt maximum consumption when motor is running
Operational temperature:
-20°C til +70°C
Relays:
Maximum quit / break voltage: 240 VAC
Maximum quit / break current: 13 A
Power cable:
The supply cable should be at least a 2-wire (Phase and zero) and with an outer diameter of approx. 8mm, which must ensure the cable glands close tightly. The cable must meet the requirement for a voltage and current of respectively. 230V / 13A. Most installation cables meet these requirements. A dedicated cable can be purchased at the webshop.
Relay cable:
The supply cable should be at least a 2-wire (Phase and zero) and with an outer diameter of approx. 8mm, which must ensure the cable glands close tightly. The cable must meet the requirement for a voltage and current of respectively. 230V / 13A. Most installation cables meet these requirements. A dedicated cable can be purchased at the webshop.
Protection class:
Class 2 product
Legal requirements and labeling:
CE-marking iht:
EN 60335-1:2012
EN 301 489-1 V2.2.0
EN 300 328 V2.1.1
Other labels:
FCC ID: 2AHMR-ESP12F